-
Mil-Spec protects critical components on vehicles to survive impacts from rocks, debris, and extreme use only found in these types of terrains.
-
Mil-Spec high tensile strength material provides a superior layer of protection our competitors cannot match. Using a high-pressure system, to achieve this unique strength distinguishes our product from other bed liner companies.
-
Other spray-on bed liner companies use a low-pressure system that produces a softer bed liner that often is more susceptible to material failure resulting in gouging or even tears.
-
Mil-Spec prides itself on using higher quality raw materials to produce a fine grain texture that does not “clump” or “sag” on vertical surfaces. Mil-Spec looks as if it came pre-installed from the vehicle manufacturer.
Installation:
We will apply a protective masking to ensure that your vehicle is protected from any bed liner overspray. Once that protection is installed, we proceed with the actual material spray coating:
-
Unlike other spray-on or drop-in bedliners, a Mil-Spec treatment is professionally applied at high pressure and high temperatures, bonding instantly and permanently to your truck. Made from a two-part polyurethane elastomer system, Mil-Spec uses equal parts of an “A” component, or hardener, and a “B” component, or resin. Using special equipment, the two liquids are combined to create a polyurethane elastomer with tough, durable, protective properties.
-
Mil-Spec dries in just 3 seconds, preventing runs or pooling that can occur with a cold, low-pressure spray-on product.
-
With a pre-scheduled appointment, the total job (including bed preparation, masking, and spraying) will take a few hours depending on the size of the area. For best results, we recommend waiting a full 24 hours before putting your new Mil-Spec to the test.
Lifetime warranty
Competitive Pricing
UV Stable
Permanent bond
Molds perfectly to your vehicle
Highly durable
Excellent gloss retention
Endless Variety of Colors
Behind Mil-Spec stands Burtin Polymer Laboratories (BPL), one of the foremost authorities in the research, development, and commercialization of polyurethane systems produced for commercial roofing, commercial and residential insulation, flotation, adhesives, packaging, spray elastomers, and custom molding products.
Recently launched, its Mil-Spec products are primarily used for pickup truck beds, tailgates, wheel wells, and other similar vehicle protection applications.
BPL continues to develop some of the very few blast mitigation products tested and approved by the US Military and utilized by the United States government in the refurbishment of the Pentagon after the 9/11 attacks.
All Burtin Polymer Labs formulas are proprietary where strict quality controls are implemented using only the finest chemical ingredients and the most sophisticated processing equipment in the industry at their 14-acre, state-of-the-science facility in Orange County, Georgia with warehousing and service operations located in seven States.
